FAQ

Q: Can the D106 be used with Winflexsim and Winwing products?

A: It does not conflict with any devices. It's essentially just a secondary display. Think of it as a secondary monitor.

 

Q: Is the D106 compatible with the FSLabs A321 in MSFS2020?

A: For aircraft models usable in MSFS2020/2024, it can be used. You can pop out and position the window onto the D106 screen and remove the borders. It cannot be used with X-Plane (XP), as there is no compatible software. It does not conflict with any devices. It's essentially just a secondary display.

 

Q: What screen projection software does the D106 use?

A: popout manager

 

Q: Is it necessary to pop out the displays and drag them onto the D106 every time I start the simulator?

A: It's automatic. Automatic pop-out, automatic positioning, automatic removal of title bars. The final result will look like the image. Popping out the 5 instruments for the A320 takes about 15 seconds.

 

Q: Which aircraft models is the D106 compatible with?

A: It is compatible with almost all aircraft models in MSFS 2020/2024, but not compatible with XP12 or XP11.

 

Q: What software is needed for the D106?

A: It requires: msfs-popout-panel-manager, msfs-pop-out-panel-manager-2024. 

They are actually different versions of the same software. They are open-source and do not require a subscription.

 

Q: What is the size of a single screen on the D106?

A: Single screen: 82.5mm * 82.5mm.

 

Q: How do I adjust the brightness of the D106?

A: There are a few methods: 

First, adjust the ND brightness within the aircraft model.

Second, there are buttons on the back of the screen to adjust brightness.

If you still find it not bright enough, you can adjust the screen brightness in the NVIDIA Control Panel.

It is recommended to just increase the brightness via the aircraft model; adjusting via NVIDIA might make it too bright.

 

Q: How long is the included HDMI cable for the D106?

A: The included HDMI cable for the D106 is 2 meters long.

Q: Is the D107 compatible with X-Plane 12 Toliss?

A:The throttle supports the Toliss A320 model on Xplane 12, but manual trim is not possible. All other functions can be achieved.

 

Q: Does the D107 only have one USB interface? Does it need a 12V power supply? Does the USB interface need to be connected to a powered USB port?

A:It has 2 USB data cables, primarily for data transmission.

It has one power cable interface, a 12V DC power input, mainly for powering the motors.

 

Q: Does the D107 require any configuration to work with Mobiflight or other programs?

A: Mobiflight primarily serves the trim and backlight functions. Inputs are configured within the game.

 

Q: Does the movement of the D107 trim wheel synchronize with the simulator?

A: The trim is synchronized with the aircraft model.

The Fenix supports automatic switching between manual and automatic trim synchronization with the aircraft model.

 

Q: Can the D107 be used with Boeing aircraft?

A: This throttle can be used to fly Boeing aircraft by setting up the inputs in the game.

 You would just need the corresponding Mobiflight configuration files for the backlight and trim functions specific to that Boeing model.

 

Q: Is the trim wheel on the D107 synchronized with the aircraft model?

A: Yes, it is synchronized. The trim wheel is equipped with two motors, and the values are synchronized.

 

Q: Which aircraft models is the D107 compatible with?

A: As the input part is essentially a computer human interface device (HID), it is not limited to specific aircraft models. 

It provides axes and buttons, which you can assign within the game for different aircraft. Only the backlight and trim functions require configuration files.

Currently, configuration files exist for models like:

MSFS 2020/2024: Fenix A320 & A319 & A321, FBW A320, Inibuilds A350.

X-PLANE 12: Toliss A320 & A330 & A319 & A321.

 

Q: Can the D107 be used together with the A107?

A: Yes, it can. However, the Mobiflight configuration files need to be merged. Refer to the Rowsfire tutorial on merging configuration files.

Q: Can the A107 backlit version be mounted on a monitor arm?

A: Yes, it can. Interface: VESA 100*100mm.

Fixing method: Secure it with M4*8mm screws. Do not use screws longer than 8mm, as they could damage the internal motherboard.

You can also purchase the A107 mount we provide.

 

Q: There's only one fuel pump button on the A320 overhead panel. Does this button turn on all 6 fuel pumps at the same time?

A:Yes, there is only one fuel pump button on the A320 overhead panel. This button turns on all 6 fuel pumps simultaneously.

 

Q: Do the A101, A102, A103, A106, A107 require an external power source or batteries?

A:No, they only need to be plugged into a USB port on the back of your computer using the included USB cable.

 

Q: How can I get the configuration files?

A:The package will contain a QR code with links to drivers, configuration files, setup tutorials, etc. If you prefer not to download the files via the QR code, you can also ask the seller directly, and they will send you a download link.

 

Q: Are the products plug-and-play?

A: The products need to be used with the Mobiflight driver. Initial configuration is required when you first launch the game. After the initial setup, you just need to ensure Mobiflight is open when you launch the game afterwards; no need to configure again. We will provide a setup tutorial.

 

Q: Which aircraft models are the products compatible with?

A:Currently, they only support the FENIX A320 on MSFS2020/2024. In the future, more aircraft models like the Inibuilds A350, FBW A320, etc., will be supported through driver and configuration file updates. The FENIX 320 is the favorite A320 among Microsoft Flight Simulator pilots.

 

Q: Are the products compatible with MSFS 2024? Can I use them with other hardware like WINWING and control all devices simultaneously via Mobiflight?

A:Compatible, but they cannot be used together with WINWING hardware because WINWING uses its own separate driver. Mobiflight cannot control WINWING devices.

 

Q: Can the A107 be used together with WINWING devices?

A:Yes, it can.

 

Q: What is the length of the Type cable for the A series?

A:150cm

 

Q: Can the A107 be used together with the D107?

A:Yes, it can. However, the Mobiflight configuration files need to be merged. Refer to the Rowsfire tutorial on merging configuration files.